English

EyeTV 3.6.4 and above can access SAT>IP servers that are available on your local network.

The process of connecting to SAT>IP servers is very straightforward:

1) Go to the EyeTV menu, and select the Setup Assistant.

2) When asked to Choose Hardware, select Network / IPTV, and SAT>IP Server:

eyetv364_satip-1

 

3) EyeTV will then allow to you select which SAT>IP servers you want to use on that Mac. They will be listed in a drop down menu:

eyetv364_satip2-1
After you select a SAT>IP server, then check “Enable this device” to make it active in EyeTV.

If you want EyeTV to always use new SAT>IP servers on your network, then check “Automatically enable new devices”.

Please Note: EyeTV only supports officially certified SAT>IP devices, as listed at http://www.satip.info/

 

If you need support regarding your EyeTV product please do not hesitate to contact us following this link.

Contact Support
https://www.geniatech.eu/faq/how-do-i-setup-eyetv-to-connect-to-a-satip-server/ How do I setup EyeTV to connect to a SAT>IP server?